基于地面运动强度及标准贯入试验的上海地区砂土地震液化评价     

李雪  曾毓燕  郁飞  施刚 《地质力学学报》2021,27(6):998-1010

上海市地处长江三角洲前缘,黄浦江和苏州河交汇区域,特殊的地理环境与沉积环境导致浅部砂层广泛发育。随着城市建设的不断推进,上海城市区域范围的砂土地震液化风险评价成为亟待研究的课题。文章基于上海市工程钻孔数据,结合地震地面运动加速度分布与标准贯入试验,建立区域性地震液化危险性评价模型,对上海市进行了地震液化危险性评价。研究认为当发生50年超越概率10%的地震条件下,上海市陆域面积的66.0%将不会产生地震砂土液化灾害,21.8%的陆域面积仅发生轻微液化,只有崇明、横沙、长兴三岛,黄浦江及苏州河两岸地震液化等级达到中等甚至严重,占全市陆域面积12.3%;50年超越概率2%的地震条件下,随着峰值地面运动加速度整体升高,全市范围内轻微—严重液化区域明显增多,可能发生地震液化的总面积达到全市陆域面积46.25%。上海市存在砂土地震液化的危险性,但是发生概率较低。研究认为,目前的抗震设计规范中上海市的设防烈度偏高,可能导致不必要的建设成本。同时研究中的不同超越概率下的地震液化危险性评价结果为上海市工程建设相关标准的合理化改进的提供了建议和参考。   相似文献   

Early Cretaceous deformation in the southern Tashkorgan region: Implications for the tectonic evolution of the northeastern Pamir     

《China Geology》2021,4(1):67-76

The Pamir Plateau comprises a series of crustal fragments that successively accreted to the Eurasian margin preceded the India-Asia collision, is an ideal place to study the Mesozoic tectonics. The authors investigate the southern Tashkorgan area, northeastern Pamir Plateau, where Mesozoic metamorphic and igneous rocks are exposed. New structural and biotite ⁴⁰Ar-³⁹Ar age data are presented. Two stages of intense deformation in the metamorphic rocks are identified, which are unconformably covered by the Early Cretaceous sediment. Two high-grade metamorphic rocks yielding 128.4 ± 0.8 Ma and 144.5 ± 0.9 Ma ⁴⁰Ar-³⁹Ar ages indicate that the samples experienced an Early Cretaceous cooling event. Combined with previous studies, it is proposed that the Early Cretaceous tectonic records in the southern Tashkorgan region are associated with Andean-style orogenesis. They are the results of the flat/low-angle subduction of the Neotethyan oceanic lithosphere.©2021 China Geology Editorial Office.  相似文献   

基于反射地震资料探讨泥河湾盆地的新生代和中生代地层     

朱小三  钱荣毅  王永  董进  迟振卿  姚培毅 《地质学报》2015,89(12):2236-2249

查明泥河湾盆地新生界及中生界地层序列及基底的分布与赋存形态是研究泥河湾盆地形成机制的基础性工作。本研究在泥河湾盆地桑干河与壶流河交接处附近采集了四条测线的反射地震数据,通过对精细处理后的地震剖面进行详细分析,在剖面上厘定了三个具有明显强反射标志的地层,即古近系的玄武岩、侏罗系上统的含煤地层和侏罗系下统的含煤地层;其中,新近系沉积层与古近系玄武岩界面在地震剖面上出现的双程旅行时为0.3~0.6s,深度范围为300~500m,而第四系泥河湾组底界由南西到北东逐渐加深,其界面深度为200~300m;侏罗系上统含煤地层在地震剖面上出现的双程旅行时在0.8s上下波动,其深度约为1200m,探测出侏罗系上统顶界面的深度范围为800~1100m;侏罗系下统含煤地层在地震剖面上出现的双程旅行时为1.0~1.4s,深度范围为1800~2000m,由此推测出中生界侏罗系与古生界寒武系地层分界线的深度为2000m左右;根据地震反射波阻抗差别推测出新元古界和太古界地层的分界面在地震剖面上出现的时间约为2.5s,其深度为4000m左右。本研究通过四条反射地震测线的数据基本上查明了泥河湾盆地位于探测区处第四系泥河湾组底界面的深度分布范围及起伏形态、侏罗系上统顶界面和下统底界面的大致埋深,为查明泥河湾盆地新生界及中生界地层序列提供了基础性的参考信息。  相似文献   

Nature,origin and evolution of a Late Pleistocene incised valley‐fill,Sunda Shelf,Southeast Asia          下载免费PDF全文

Faisal A. Alqahtani  Howard D. Johnson  Christopher A.‐L. Jackson  Mohd Rapi B. Som 《Sedimentology》2015,62(4):1198-1232

Understanding the stratigraphic fill and reconstructing the palaeo‐hydrology of incised valleys can help to constrain those factors that controlled their origin, evolution and regional significance. This condition is addressed through the analysis of a large (up to 18 km wide by 80 m deep) and exceptionally well‐imaged Late Pleistocene incised valley from the Sunda Shelf (South China Sea) based on shallow three‐dimensional seismic data from a large (11 500 km²), ‘merge’ survey, supplemented with site survey data (boreholes and seismic). This approach has enabled the characterization of the planform geometry, cross‐sectional area and internal stratigraphic architecture, which together allow reconstruction of the palaeo‐hydrology. The valley‐fill displays five notable stratigraphic features: (i) it is considerably larger than other seismically resolvable channel forms and can be traced for at least 180 km along its length; (ii) it is located in the axial part of the Malay Basin; (iii) the youngest part of the valley‐fill is dominated by a large (600 m wide and 23 m deep), high‐sinuosity channel, with well‐developed lateral accretion surfaces; (iv) the immediately adjacent interfluves contain much smaller, dendritic channel systems, which resemble tributaries that drained into the larger incised valley system; and (v) a ca 16 m thick, shell‐bearing, Holocene clay caps the valley‐fill. The dimension, basin location and palaeo‐hydrology of this incised valley leads to the conclusion that it represents the trunk river, which flowed along the length of the Malay Basin; it connected the Gulf of Thailand in the north with the South China Sea in the south‐east. The length of the river system (>1200 km long) enables examination of the upstream to downstream controls on the evolution of the incised valley, including sea‐level, climate and tectonics. The valley size, orientation and palaeo‐hydrology suggest close interaction between the regional tectonic framework, low‐angle shelf physiography and a humid‐tropical climatic setting.  相似文献   

Neoglacial (<3000 years) till and flutes at Saskatchewan Glacier,Canadian Rocky Mountains,formed by subglacial deformation of a soft bed          下载免费PDF全文

Nick Eyles  Joe. I. Boyce  Niko Putkinen 《Sedimentology》2015,62(1):182-203

Understanding the processes that deposit till below modern glaciers provides fundamental information for interpreting ancient subglacial deposits. A process‐deposit‐landform model is developed for the till bed of Saskatchewan Glacier in the Canadian Rocky Mountains. The glacier is predominantly hard bedded in its upper reaches and flows through a deep valley carved into resistant Palaeozoic carbonates but the ice margin rests on a thick (<6 m) soft bed of silt‐rich deformation till that has been exposed as the glacier retreats from its Little Ice Age limit reached in 1854. In situ tree stumps rooted in a palaeosol under the till are dated between ca 2900 and 2700 yr bp and record initial glacier expansion during the Neoglacial. Sedimentological and stratigraphic observations underscore the importance of subglacial deformation of glaciofluvial outwash deposited in front of the advancing glacier and mixing with glaciolacustrine carbonate‐rich silt to form a soft bed. The exposed till plain has a rolling drumlinoid topography inherited from overridden end moraines and is corrugated by more than 400 longitudinal flute ridges which record deformation of the soft bed and fall into three genetically related types: those developed in propagating incipient cavities in the lee of large subglacial boulders embedded in deformation till, and those lacking any originating boulder and formed by pressing of wet till up into radial crevasses under stagnant ice. A third type consists of U‐shaped flutes akin to barchan dunes; these wrap around large boulders at the downglacier ends of longitudinal scours formed by the bulldozing of boulders by the ice front during brief winter readvances across soft till. Pervasive subglacial deformation during glacier expansion was probably facilitated by large boulders rotating within the soft bed (‘glacioturbation’).  相似文献   

Clinoform geometry,geomorphology, facies character and stratigraphic architecture of a sand‐rich subaqueous delta: Jurassic Sognefjord Formation,offshore Norway          下载免费PDF全文

Stefano Patruno  Gary J. Hampson  Christopher A.‐L. Jackson  Tom Dreyer 《Sedimentology》2015,62(1):350-388

The integration of core sedimentology, seismic stratigraphy and seismic geomorphology has enabled interpretation of delta‐scale (i.e. tens of metres high) subaqueous clinoforms in the upper Jurassic Sognefjord Formation of the Troll Field. Mud‐prone subaqueous deltas characterized by a compound clinoform morphology and sandy delta‐scale subaqueous clinoforms are common in recent tide‐influenced, wave‐influenced and current‐influenced settings, but ancient examples are virtually unknown. The data presented help to fully comprehend the criteria for the recognition of other ancient delta‐scale subaqueous clinoforms, as well as refining the depositional model of the reservoir in the super‐giant Troll hydrocarbon field. Two 10 to 60 m thick, overall coarsening‐upward packages are distinguished in the lower Sognefjord Formation. Progressively higher energy, wave‐dominated or current‐dominated facies occur from the base to the top of each package. Each package corresponds to a set of seismically resolved, westerly dipping clinoforms, the bounding surfaces of which form the seismic ‘envelope’ of a clinoform set and the major marine flooding surfaces recognized in cores. The packages thicken westwards, until they reach a maximum where the clinoform ‘envelope’ rolls over to define a topset–foreset–toeset geometry. All clinoforms are consistently oriented sub‐parallel to the edge of the Horda Platform (N005–N030). In the eastern half of the field, individual foresets are relatively gently dipping (1° to 6°) and bound thin (10 to 30 m) clinothems. Core data indicate that these proximal clinothems are dominated by fine‐grained, hummocky cross‐stratified sandstones. Towards the west, clinoforms gradually become steeper (5° to 14°) and bound thicker (15 to 60 m) clinothems that comprise medium‐grained, cross‐bedded sandstones. Topsets are consistently well‐developed, except in the westernmost area. No seismic or sedimentological evidence of subaerial exposure is observed. Deposition created fully subaqueous, near‐linear clinoforms that prograded westwards across the Horda Platform. Subaqueous clinoforms were probably fed by a river outlet in the north‐east and sculpted by the action of currents sub‐parallel to the clinoform strike.  相似文献   

Polygonal deformation bands     

《Journal of Structural Geology》2015

We report for the first time the occurrence of polygonal faults in sandstone, which is compelling given that layer-bound polygonal fault systems have been observed so far only in fine-grained sediments such as clay and chalk. The polygonal faults are shear deformation bands that developed under shallow burial conditions via strain hardening in dm-wide zones. The edges of the polygons are 1–5 m long. The shear deformation bands are organized as conjugate faults along each edge of the polygon and form characteristic horst-like structures. The individual deformation bands have slip magnitudes ranging from a few mm to 1.5 cm; the cumulative average slip magnitude in a zone is up to 10 cm. The deformation bands heaves, in aggregate form, accommodate a small isotropic horizontal extension (strain <0.005). The individual shear deformation bands show abutting T-junctions, veering, curving, and merging where they mechanically interact. Crosscutting relationships are rare. The interactions of the deformation bands are similar to those of mode I opening fractures. The documented fault networks have important implications for evaluating the geometry of km-scale polygonal fault systems in the subsurface, top seal integrity, as well as constraining paleo-tectonic stress regimes.  相似文献   

Structural style in a young flexure-induced oblique extensional system,north-western Bonaparte Basin,Australia     

《Journal of Structural Geology》2015

In the north-western Bonaparte Basin (North West Shelf of Australia) Neogene to Recent flexure-induced extension superimposed obliquely over the Mesozoic rift structures. Thus, the area offers a good opportunity to investigate the dynamics and architecture of oblique extension fault systems. Analysis of basin-scale 2D and 3D seismic data along the Vulcan sub-basin shows that Neogene deformation produced a new set of extensional, en échelon faults, at places accompanied by the reactivation of the Mesozoic faults. The pre-existing Mesozoic structures strongly control the distribution of the Neogene-Recent deformation, both at regional and local scales. Main controls on the Neogene-Recent fault style, density and segmentation/linkage include: (1) the orientation of the underlying Mesozoic structures, (2) the obliqueness of the younger extension relative to the rift-inherited faults, and (3) the proximity to the Timor Trough. Three types of vertical relationships have been observed between Mesozoic and Neogene-Recent faults. Hard linkages seems to develop when both fault systems trend parallel, therefore increasing risks for trap integrity. It is suggested that the orientation of maximum horizontal stress (S_Hmax) relative to the Mesozoic faults, forming hydrocarbon traps, is critical for their potential seal/leak behaviour. Stratigraphic growth across the faults indicates that main fault activity occurred during the Plio-Pleistocene, which corresponds to the timing of tectonic loading on Timor Island and the development of lithospheric flexure. Synchronism of normal faulting with flexural bending suggests that extensional deformation on the descending Australian margin accompanied the formation of the Timor Trough.  相似文献   

Ronge-Kutta法在计算复杂构造区域地震波旅行时中的应用     

邹长桥  段永红  唐秋惠  徐佼  陈立波 《大地测量与地球动力学》2015,35(5):894-897

采用Ronge-Kutta射线追踪法对地震勘探中几个典型地质模型的地震波射线路径和旅行时计算的实例和效果进行分析。将Ronge-Kutta射线追踪模拟的结果与程函方程计算的时距曲线结果进行对比,验证了Ronge-Kutta射线追踪法的易实现性和程函方程有限差分旅行时算法的强稳定性,表明Ronge-Kutta射线追踪法在复杂构造区域进行地震射线路径和旅行时计算时能得到较好的模拟效果。  相似文献   

十三陵地震台gPhone重力仪的仪器性能与水文响应分析   总被引：2，自引：0，他引：2  

佘雅文  付广裕  韦进 《大地测量与地球动力学》2015,35(5):901-905

对安置于十三陵地震台的两台gPhone重力仪(109、118号)在2013-04~08的连续观测数据进行潮汐分析和提取重力残差处理。结果表明,gPhone重力仪监测到降水导致μGal量级的重力变化;gPhone重力仪获取的二阶重力残差变化与距离十三陵地震台15km的沙河地震台静水位变化之间存在4d左右延迟的正相关对应关系,显示了地下水位观测对重力观测解释的必要性。因此,有必要对我国的连续重力观测网补充地下水位观测,提高连续重力观测的数据处理精度。  相似文献